First and foremost, in deciding between these 2 subwoofers, you need to be asking yourself whether you are going to get 2 PB-1000’s or 2 PB-2000’s.

Getting a single sub, no matter how good it is, will leave gaping holes in your bass performance. No bueno. This is true of any subwoofer, not just SVS subs. Splitting your bass budget to get 2, so long as they are still quality subs, is almost always better than a single awesome sub at the same price.   

This isn’t some audiophile thing, the way some might insist on $2,500 speaker wire (or a certain brand of cracker that MUST go with your caviar) otherwise life just isn’t worth living. This is real, and it makes a noticeable difference, even if the results aren’t always measurable.

2 subwoofers break down the standing wave effect, reducing peaks and dead spots, allowing you to hear bass that you would not otherwise be able to fully hear. It’s important, especially if you are going to go so far as to get good subs. 

With that out of the way, people ask whether it is worth the extra money to go from PB-1000’s to the PB-2000’s. Being world’s first SVS affiliate, and having heard both in my room for some time, my knee jerk reaction is absolutely, but I need to go into some reasons why. Budget, of course, is a big issue, and space is the other.

In considering your budget, only you can decide that issue. Is it worth being late on your electric bill? I can’t answer that for you, some people might say yes, but I probably wouldn’t do that myself. For sure, the PB-1000’s are excellent subs, and will get down to 21 hertz before starting to taper off, which is a drastic departure from most “common” ported subwoofers.

A lot of subs, even expensive ones, start “calling it a day” and tapering off around 30-40 hertz, and some even sooner than that. The PB-1000’s are just getting started in that range. They will put a big grin on your face if you’ve never heard a quality sub. Even if you’ve heard quality subs, they are impressive and earn respect.

They are also the smallest ported subwoofer I can confidently recommend at this point. They are still larger than many ported 10” subs out there, but still “small” in the realm of proper ported bass.    

Are they enough?

I’ve stated before and I’ll say it again: If the PB-1000’s were the last subs I could ever have, I would not be upset in the slightest.

I still believe they are the smartest buy in bass. I learned how to measure subwoofers with these, and through my own mistake, I damaged my ears, reaching well over 120 decibels in my room. It took 2-3 weeks to feel “right” again. They never made a bad sound during that brutal onslaught.

Output wise, yes, they are enough for me, and I would have to assume they are enough for most sane people.

Honestly though, who get’s into this to have “enough”, right? I would have 2 PB-16 Ultra’s if I could, it has nothing to do with “need”.

So what do you get when going from the PB-1000 to the PB-2000? Power is increased from 300 watts RMS to 500 watts RMS, and 700 watts peak to 1100 watts peak. More power is almost always a good thing. 

You also get deeper response. Where the PB-1000’s are respectably flat to 21 hertz, the PB-2000’s are flat to 14 hertz. For perspective, I can’t hear below 17 hertz, so the PB-2000’s cover every bit of audible bass for me. I love that in a subwoofer, and for a ported subwoofer, it’s not common at all. Gold star!

On the PB-2000 you get the rounded metal grille, where the PB-1000 has a more traditional cloth over wood grille. Some people have issues with the metal grill. For some it’s an aesthetic thing, while others have found that the grill will fall off if not pushed in all the way, which could take you by surprise. It’s fairly heavy and could come down with a crash.

I never had an issue with the metal grille at all, and I like how it cleans easily, where cloth grills can attract and hold dust. I have dogs that bring in dust, so I notice this kind of thing. I prefer the metal grille myself.   

Then there is this thing called headroom. The PB-1000’s have plenty of output in a dual configuration, so why would I want more power? Well, when you have more than you need, the results are often better, like horsepower or towing capacity.

Try hauling a heavy trailer up a grade with a truck loaded to it’s maximum GCVWR (gross combined vehicle weight rating), and you are really going to feel it. Now haul that same trailer with a more capable truck that has an extra 5,000 pounds worth of capacity, and that same grade will feel like nothing. It’s a little like that, you never feel like you’re pushing anything too hard, and it does what you want with ease.

The PB-2000’s are barely working at levels that would have the PB-1000’s really moving, so there’s a lot left over. I’ve not pushed the PB-2000’s to their limits. I don’t see any need to; they do so well when I play them as loud as I can tolerate already.

I’ve even cranked up the subwoofer output at the AVR and really rocked them, but I gave up before they did. I pushed the PB-1000’s to their limits, and while it was uncomfortable, I still managed to do it. My house is older, so I chickened out on the PB-2000’s. Another gold star.  

So for those agonizing, I can say that both are absolutely impressive, and if you’re coming from disappointing bass (like most are), it will sound incredible by comparison. The difference compared to most subs is undeniable unless you legitimately have hearing problems.

At this point, it’s like deciding whether to get a 3D TV or not. It’s really nice to have 3D, but it’s not going to ruin your home theater experience if you stay 2D. As long as you are at least 4K, you’re in pretty good shape. Dual PB-1000’s should absolutely satisfy your needs without any real remorse of what could have been.  

That said, it’s good to keep in mind that SVS has a phenomenal consumer protection package called the Bill of Rights, and one of the benefits is the ability to upgrade within a year at full price. I’ve had a lot of people tell me there is no way they could justify anything more than the PB-1000’s, and I do see their point.

Conclusion:

For me, the only thing that would hold me back from getting the PB-2000’s over the PB-1000’s is whether I have the cash or not. In the grand scheme of things they aren’t really much bigger, so size is not that big of a deal to me. The PB-2000’s fit nicely on either side of my entertainment center, and looking at the specs of other subs, they will likely be the best fitting subwoofers on “The List” in my situation.

The PB-2000’s represent everything I discuss on this site and this channel: True, authoritative, full range bass performance at a reasonable price. The PB-1000’s are almost as good, only losing a small amount of bottom end and headroom in comparison.

In my opinion, the PB-1000’s are better in a dual configuration than a “single” PB-2000.

Make duals a priority, and you should be in good shape.

Hope this helps!
Ryan B.